N
e
w
s

IR’s Control ICs for Energy-Efficient Fluorescent Ballasts Slash Component Count; Increase Reliability and Performance

International Rectifier a world leader in power management technology, today introduced the IRS2530D and IRS2158D 600V control ICs for energy-efficient dimming fluorescent lighting ballast applications

International Rectifier a world leader in power management technology, today introduced the IRS2530D and IRS2158D 600V control ICs for energy-efficient dimming fluorescent lighting ballast applications.

The IRS2530D DIM8™ is a unique linear dimming ballast control IC with half-bridge driver in a compact 8-pin form factor. The new device provides a competitive solution to replace inefficient incandescent bulbs in multi-level and three-way compact fluorescent lighting (CFL) applications. Requiring only several small external components, the IRS2530D significantly simplifies and shrinks circuit design and delivers a dimming system performance of up to 10 percent for compact fluorescent lamps as well as linear ballasts.

The IRS2158D 16-pin fluorescent dimming ballast control IC with half-bridge driver is designed for applications requiring dimming performance below 10 percent. Comprehensive protection features such as protection from failure of a lamp to strike, filament failures and end-of-life protection are offered making the device well suited for thin lamps including the increasingly popular T5 lamp.

“These innovative new devices add to IR’s rich portfolio of energy-efficient products. With the opportunity to save up to 30 percent of energy compared to non-dimming lighting, designers are seeking to create new dimming product lines using several different control methods. With a high level of integration and protection features, the new control ICs provide the small form factor, functionality and performance required while reducing part count and simplifying design,” said Tom Ribarich, IR’s director, Lighting Systems and Applications.

IRS2530D DIM8™ Technical Data

The IRS2530D DIM8™ control IC features IR’s patented ballast and high-voltage technologies. A single high-voltage pin senses the half-bridge current and voltage to perform necessary ballast protection functions. The DC dim input voltage reference and AC lamp current feedback are combined allowing a single pin to be used for dimming. These high-voltage control algorithms coupled with a simple dimming method in a single 8-pin IC result in a significantly reduced component count, increased reliability and reduced design cycle time, while maintaining high dimming ballast system performance. The IRS2530D also features an internal non-ZVS protection and internal crest factor protection to prevent lamp failure damaging the ballast.

IRS2158D Technical Data

The IRS2158D is a fully integrated, fully protected 600V ballast control IC designed to drive a wide variety of fluorescent lamps. The device’s features include programmable half-bridge over-current protection, programmable pre-heat and run frequencies, programmable preheat time and deadtime, closed-loop half-bridge ignition current regulation, programmable end-of-life protection, brownout protection and low input offset operational amplifier for dimming, current or power control. In addition, the new device features end-of-life window comparator pin and internal 60-event current sense up/down fault counter to accommodate T5 lamp and multi-lamp ballasts.

Specifications

Programmability IRS2530D IRS2158D
Preheat Time Yes Yes
Preheat Frequency - Yes
Closed Loop Ignition Current - Yes
Run Frequency Yes Yes
Deadtime - Yes
Features IRS2530D IRS2158D
Fixed Deadtime 2.0 µs Programmable
Failure to Strike On Over Current Yes
Open Filament On Over Current Yes
Brownout Protection with non-ZVS Yes
Shutdown Pin - Yes
Fault Counter - Yes
End-of-Life Protection - Yes
Integration IRS2530D IRS2158D
Bootstrap Diode Yes Yes
Crest Factor Over Current Protection Yes -
Adaptive Non-ZVS Protection Yes -
Dimming IRS2530D IRS2158D
Minimum Dimming Level 10% < 10%
Package IRS2530D IRS2158D
DIP & SOIC 8 pin 16 pin

The IRPLDIM4E, IRPLDIM5E, IRPLCFL8U reference designs, featuring the IRS2530D are available in addition to the IRPLDIM3 reference design which features the IRS2158D.

Availability and Pricing

Available in an 8-lead DIP or 8-lead SOIC package, pricing for the IRS2530D begins at US $1.09 in 10,000-unit quantities. The IRS2158D is available in16-pin PDIP and 16-pin narrow body SOIC packages with pricing beginning at US $1.29 each in 10,000-unit quantities. Pricing for the IRPLDIM4E, IRPLDIM5E and IRPLCFL8U reference designs is US $99 per kit, and pricing for the IRPLDIM3 is US $150 per kit. Production orders are available immediately. The devices are RoHS compliant and prices are subject to change.

From: http://www.irf.com



Publication date: 11.11.2008


Previous day    All of the current day     Next day

Other news ...


News Archive